Medialogic USB Devices Driver

Posted on

Features Documentation Knowledge Base Discussion Forums

Media Logic Usb Devices Driver Windows 10

Using USB Devices in a Virtual Machine Using USB Devices in a Virtual Machine

The following sections describe how to use USB devices in a virtual machine:

VMware Workstation 4 provides a two-port USB 1.1 controller. You can use up to two USB devices in your virtual machine if both your host operating system and your guest operating system support USB. If your host computer supports USB 2.0 devices, you can use those devices in the virtual machine.

Select Tape drivers and software for the Tape systems menu. Select Tape device drivers for the Tape drivers and software menu. Select your operating system for the Platform menu. It is recommended that you install the most current driver available.

Note: Windows NT and Linux kernels older than 2.2.17 do not support USB.

Although your host operating system must support USB, you do not need to install device-specific drivers for your USB devices in the host operating system if you want to use those devices only in the virtual machine.

When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues. USB Drivers are one of the must-have tools to be installed on your PC or Mac. Because of that, your mobile device interacts with your PC.These work as Bridge between your Phone and your computer. The USB drivers help us to connect our phone to the computer and perform tasks like transferring data, syncing your device with a PC.

On a Windows 2000 host computer with USB 2.0 support, be sure you are using the Microsoft USB 2.0 driver for the USB controller. Third-party USB 2.0 drivers, such as those provided by some motherboard manufacturers, are not supported. For notes on replacing the third-party drivers, see Replacing USB 2.0 Drivers on a Windows 2000 Host.

Notes on USB Support in Version 4 Notes on USB Support in Version 4

We have tested a variety of USB devices with this release. In general, if the guest operating system has appropriate drivers, you should be able to use PDAs, printers, storage (disk) devices, scanners, MP3 players, digital cameras and memory card readers.

Modems and certain streaming data devices, such as speakers and Web cams, do not work properly.

Enabling and Disabling the USB Controller Enabling and Disabling the USB Controller USB

The virtual machine's USB ports are enabled by default. If you will not be using USB devices in a virtual machine, you can disable its USB controller using the virtual machine settings editor.

Connecting USB Devices

Medialogic USB Devices Driver

Connecting USB Devices

When a virtual machine is running, its window is the active window and a USB device is plugged into the host computer, the device automatically connects to the guest instead of the host. This autoconnect feature can be disabled in the USB Controller panel of the virtual machine settings editor (VM > Settings). If all of the virtual machine's USB ports are already occupied when it is trying to connect automatically to a new device, a dialog box gives you a choice: you can either disconnect one of the existing USB devices to free its port or ignore the new device, allowing the device to connect to the host.

Choose VM > Removable Devices to connect specific USB devices to your virtual machine. You can connect up to two USB devices at a time. If the physical USB devices are connected to the host computer through a hub, the virtual machine sees only the USB devices, not the hub.

There is a menu item for each of the USB ports. Move the mouse over one of these items to see a cascading menu of devices that are plugged into your host computer and available for use. To connect a device to the virtual machine, click its name.

If a device is already connected to that port, click the name of a new device to release the first device and connect the new one.

To release a connected device, click None on the cascading menu for the port to which it is connected.

If you physically plug a new device into the host computer and the autoconnect feature does not connect it to a virtual machine, the device is initially connected to the host. Its name is also added to the VM > Removable Devices menu so you can connect it to the virtual machine manually.

Using USB with a Windows Host Using USB with a Windows Host

Windows 2000, Windows XP and Windows Server 2003 hosts: When a particular USB device is connected to a virtual machine for the first time, the host detects it as a new device named VMware USB Device and installs the appropriate VMware driver.

Windows XP and Windows Server 2003 hosts: User confirmation is required in the Found New Hardware Wizard. Select the default action — Install the software automatically. Once the software is installed, the guest operating system detects the USB device and searches for a suitable driver.

When you are synchronizing a PDA, such as a Palm handheld or Handspring Visor, to a virtual machine for the first time, the total time required to load the VMware USB device driver in the host and the PDA driver in the guest may exceed the device's connection timeout value. This causes the device to disconnect itself from the computer before the guest can synchronize with it. If this occurs, let the guest finish installing the PDA driver, dismiss any connection error warnings, then try synchronizing the PDA again. The second attempt should succeed.

Replacing USB 2.0 Drivers on a Windows 2000 Host Replacing USB 2.0 Drivers on a Windows 2000 Host

To use VMware Workstation 4 on a Windows 2000 host that has USB 2.0 ports, you must use the Microsoft USB 2.0 drivers for the USB controller in the host operating system. If your host operating system is using a third-party driver — a driver supplied by your motherboard vendor, for example — you must replace it.

Take the following steps to check the provider of your driver:

  1. Go to the Device Manager. Right-click My Computer, choose Properties, click the Hardware tab, then click Device Manager.
  2. Expand the listing for Universal Serial Bus controllers.
  3. Right-click the listing for the controller and choose Properties.
  4. Click the Driver tab. If the driver provider shown on that page is Microsoft, you have the correct driver already.

If the driver provider is not Microsoft, download the latest USB driver for your host operating system from the Microsoft Web site and follow the Microsoft instructions to install it. Details are available in Microsoft knowledge base article 319973.

Installing USB Devices as a Non-Administrator Installing USB Devices as a Non-Administrator

Any user on a Windows host can connect USB devices for use in a virtual machine. You no longer need administrative privileges on the host to connect a USB device to a virtual machine.

This functionality is not enabled by default. To enable it, you must use a text editor such as Notepad to add one line to the global configuration file. This file is
C:Documents and Settings<username>Application DataVMwareconfig.ini

Add the following line anywhere in the file:

usb.EnablePnpMgr = TRUE

Medialogic USB Devices Driver

Note: A user with administrative privileges on the host operating system must install a USB device on the host before it can be connected by users who do not have administrative privileges.

Using USB with a Linux Host Using USB with a Linux Host

On Linux hosts, VMware Workstation uses the USB device file system to connect to USB devices. In most Linux systems that support USB, the USB device file system is at /proc/bus/usb. If your host operating system uses a different path to the USB device file system, you can change it in the virtual machine settings editor (VM > Settings > USB). Enter the correct path in the Path to usbdevfs field.

Who Has Control over a USB Device? Who Has Control over a USB Device? What

Only one computer — host or guest — can have control of a USB device at any one time.

Device Control on a Windows Host Device Control on a Windows Host

When you connect a device to a virtual machine, it is 'unplugged' from the host or from the virtual machine that previously had control of the device. When you disconnect a device from a virtual machine, it is 'plugged in' to the host.

Caution: On Windows 2000, Windows XP and Windows Server 2003 hosts, you need to take a special step to disconnect USB network and storage devices from the host. There is a system tray icon called Eject Hardware on Windows 2000 and Safely Remove Hardware on Windows XP and Windows Server 2003. Use this icon to disconnect the device from the host before connecting it to a virtual machine.

Note: On Windows 2000, Windows XP and Windows Server 2003 hosts, when you connect a USB network or storage device in a virtual machine, you may see a message on your host that says the device can be removed safely. This is normal behavior, and you can simply dismiss the dialog box. However, do not remove the device from your physical computer. VMware Workstation automatically transfers control of the device to the virtual machine.

Under some circumstances, if a USB storage device is in use on the host (for example, one or more files stored on the device are open on the host), an error appears in the virtual machine when you try to connect to the device. You must let the host complete its operation or close any application connected to the device on the host, then connect to the device in the virtual machine again.

Device Control on a Linux Host Device Control on a Linux Host

On Linux hosts, guest operating systems can use devices that are not already in use by the host — that is, devices that are not claimed by a host operating system driver.

If your device is in use by the host and you try to connect it to the guest using the VM > Removable Devices menu, a dialog box appears, informing you that there is a problem connecting to the device.

Medialogic usb devices driver updater

To disconnect the device from the host, you must unload the device driver. You can unload the driver manually as root (su) using the rmmod command. Or, if the driver was automatically loaded by hotplug, you can disable it in the hotplug configuration files in the /etc/hotplug directory. See your Linux distribution's documentation for details on editing these configuration files.

A related issue sometimes affects devices that rely on automatic connection (as PDAs often do).

If you have successfully used autoconnection to connect the device to your virtual machine, then experience problems with the connection to the device, take the following steps:

  1. Disconnect and reconnect the device. You can either unplug it physically, then plug it back in or use the VM > Removable Devices menu to disconnect it and reconnect it.
  2. If you see a dialog box warning that the device is in use, disable it in the hotplug configuration files in the /etc/hotplug directory.
Disconnecting USB Devices from a Virtual Machine Disconnecting USB Devices from a Virtual Machine

Before unplugging a USB device or using the VM > Removable Devices menu to disconnect it from a virtual machine, be sure it is in a safe state.

You should follow the procedures the device manufacturer specifies for unplugging the device from a physical computer. This is true whether you are physically unplugging it, moving it from host to virtual machine, moving it between virtual machines or moving it from virtual machine to host.

This is particularly important with data storage devices (a Zip drive, for example). If you move a data storage device too soon after saving a file and the operating system has not actually written the data to the disk, you can lose data.

Human Interface Devices Human Interface Devices

Best Usb Devices

USB human interface devices, such as the keyboard and mouse, are not handled though the virtual machine's USB controller. Instead, they appear in the virtual machine as a standard PS/2 keyboard and mouse, even though they are plugged into USB ports on the host.

Media Logic Usb Devices Driver Windows 7

  • August 22, 2019 2.9.8

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.8

    Released

    August 22, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added several internal interfaces for particular sensors (J003).
  • January 25, 2019 2.9.6

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.6

    Released

    January 25, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added missing Tonemapping Auto property.
  • May 4, 2018 2.9.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.5

    Released

    May 4, 2018

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.
  • November 21, 2017 2.9.4

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.4

    Released

    November 21, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Repaired not working J003 mono sensor pattern fix on particular video formats.
    2. This driver version is the last that works in Windows XP.
  • January 9, 2017 2.9.3

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.3

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added a pattern fix for J003 mono sensors.
  • January 9, 2017 2.9.1

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.1

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.
  • January 15, 2016 2.8.9

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.9

    Released

    January 15, 2016

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Changed certificates so that the driver can also be installed in Vista.
  • November 9, 2015 2.8.7

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.7

    Released

    November 9, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed an error which can appear when using sharpness on older CPUs.
  • October 20, 2015 2.8.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.5

    Released

    October 20, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed a bug which can appear on LivePause call.
  • July 15, 2015 2.8.0

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.0

    Released

    July 15, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support of DFK ECU010-L34 with serial number property.
    2. Added tone mapping.
  • February 17, 2015 2.7.33

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.33

    Released

    February 17, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.
  • February 5, 2015 2.7.32

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.32

    Released

    February 5, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.
  • January 14, 2015 2.7.31

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.31

    Released

    January 14, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support for IMX236 based cameras.
    2. Support for RGB64 color formats.
    3. Several performance improvements.
  • June 6, 2014 2.7.9.1152

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.9.1152

    Released

    June 6, 2014

    Type

    ZIP

    Filesize

    2.1MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast.
    2. Added new property: Highlight reduction.
    3. Added new property: White balance temperature controls.
    4. Pixelfix for Y16 cameras now works as expected.
    5. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.
  • January 1, 2014 2.6.5.1014

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.6.5.1014

    Released

    January 1, 2014

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed missing auto-gain for DFK AFU130.
    2. Fixed focus when start value is out of auto_focus_range.
    3. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong.
    4. Fixed auto focus ROI not working for 21*UC cameras.
    5. Fixed crash on load/connect with certain cameras 22/72xUC.
    6. Fixed previous exposure settings not being loaded on reconnect.
    7. Complete reworking of internal property system.
    8. Fixed Windows XP driver load crash.
    9. Fixed drop counter to be accessible from DirectShow.
    10. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible).
    11. Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.
  • February 26, 2013 2.4.14.851

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.4.14.851

    Released

    February 26, 2013

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. WHQL certification.