Microchip Motherboards Driver Download For Windows 10

Posted on

The package provides the installation files for Microchip Technology LAN9512 USB 2.0 to Ethernet 10/100 Adapter Driver version 2.15.0.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. If you have enough time and patience, then you can make use of Device Manager, i.e., the driver management tool in Windows to download MSI motherboard drivers, install, and update them. Below is the step series that you need to follow for doing it. Step 1: Activate the Run box by employing the Windows + R shortcut.

Printers are listed as either having Windows 10 Web Package Availability (i.e. You can download Dell-made drivers via Drivers & Downloads), Windows 10 Drivers in CD (i.e. Windows 10 drivers for this printer were included on the installation disc that came with the printer), or Windows 10 Drivers in OS or Windows Update (i.e. Microsoft included.

Operating SystemCurrentPreviousNotes
InterfaceDriver RevisionInterfaceDriver Revision
• RS-232
• USB
UniWinDriver708.zip
7.08 Driver Manual
• RS-232
• USB
EEPROM support available
• RS-232
• USB
• PS/2
6.20cs
6.20cs XPe
N/ALegacy TSHARC Driver
Touch Base Drivers• RS-232
• PS/2
• USB
Available for
Download
WinCE, WinXP/7/8,
WinXPe/7e,Linux,
MacOS
Win CE Net 4.2• RS-232
• PS/2
• USB
WinCE4.2 118a
Drivers Manual
• RS-232
• PS/2
• USB
WinCE4.2 1.16
Drivers Manual
WinCE 5.0• RS-232
• PS/2
• USB
WinCE5.0 1.18b
Drivers Manual
• RS-232
• PS/2
• USB
WinCE5.0 1.16
Drivers Manual
WinCE 6.0• RS-232
• PS/2
• USB
WinCE6.0 118b
Drivers Manual
N/A
Linux• RS-232
• PS/2
• USB
3.23
Drivers Manual
• RS-232
• PS/2
• USB
3.04c
Drivers Manual
3.23 recommended for kernels 2.6.27 and later
Linux• RS-232
• UART (TTL)
V 102
User Guide
N/AOpen source kernel code for Linux development
Linux• RS-232
• PS/2
• USB
2.07N/ARecommended for legacy support of older Linux distributions
MacOS9• USB1.06N/A
MacOSX• USB• Motorola 1.04
• Intel & PPC 2.1.0
• USB1.03
2.00
Windows ME
Window98
• RS-232
• PS/2
• USB
UniWinDriver620cs.zip
Drivers Manual
• RS-232
• PS/2
• USB
6.19cs
6.19cs Manual
Windows 95• RS-232
• PS/2
• USB
• BUS
5.04c
Drivers Manual
• RS-232
• PS/2
• USB
• BUS
5.04b
Drivers Manual
Windows 3.1x• RS-232
• PS/2
• USB
3.01
Drivers Manual
N/A
Win NT 4.0• RS-232
• PS/2
• USB
5.00
Drivers Manual
• RS-232
• PS/2
• USB
4.01b
Win CE 3.x• RS-232
• PS/2
• USB
1.10
Drivers Manual
1.09
Win CE 4.0• RS-232
• PS/2
• USB
x86 driver
GEODEx86_1.00
ARMV4I Intel Xscale
N/A
Win CE Net 4.1• RS-232
• PS/2
• USB
x86 101N/A
DOS• RS-232
• PS/2
3.04c
Drivers Manual
• RS-232
• PS/2
• BUS
3.30
-->

Versions supported

  • Windows 10
  • Windows 8.1

Applies to

  • Device manufacturers of CDC Control devices

Microsoft-provided in-box driver (Usbser.sys) for your Communications and CDC Control device.

In Windows 10, the driver has been rewritten by using the Kernel-Mode Driver Framework that improves the overall stability of the driver.

  • Improved PnP and power management by the driver (such as, handling surprise removal).
  • Added power management features such as USB Selective Suspend.

In addition, UWP applications can now use the APIs provided by the new Windows.Devices.SerialCommunication namespace that allow apps to talk to these devices.

Usbser.sys installation

Load the Microsoft-provided in-box driver (Usbser.sys) for your Communications and CDC Control device.

Note

If you trying to install a USB device class driver included in Windows, you do not need to download the driver. They are installed automatically. If they are not installed automatically, contact the device manufacturer. For the list of USB device class driver included in Windows, see USB device class drivers included in Windows.

Windows 10

In Windows 10, a new INF, Usbser.inf, has been added to %Systemroot%Inf that loads Usbser.sys as the function device object (FDO) in the device stack. If your device belongs to the Communications and CDC Control device class, Usbser.sys is loaded automatically.You do not need to write your own INF to reference the driver. The driver is loaded based on a compatible ID match similar to other USB device class drivers included in Windows.

USBClass_02

Download

USBClass_02&SubClass_02

  • If you want to load Usbser.sys automatically, set the class code to 02 and subclass code to 02 in the Device Descriptor. For more information, see USB communications device class. With this approach, you are not required to distribute INF files for your device because the system uses Usbser.inf.
  • If your device specifies class code 02 but a subclass code value other than 02, Usbser.sys does not load automatically. Pnp Manager tries to find a driver. If a suitable driver is not found, the device might not have a driver loaded. In this case, you might have to load your own driver or write an INF that references another in-box driver.
  • If your device specifies class and subclass codes to 02, and you want to load another driver instead of Usbser.sys, you have to write an INF that specifies the hardware ID of the device and the driver to install. For examples, look through the INF files included with sample drivers and find devices similar to your device. For information about INF sections, see Overview of INF Files.

Note

Microsoft encourages you to use in-box drivers whenever possible. On mobile editions of Windows, such as Windows 10 Mobile, only drivers that are part of the operating system are loaded. Unlike desktop editions, it is not possible to load a driver through an external driver package. With the new in-box INF, Usbser.sys is automatically loaded if a USB-to-serial device is detected on the mobile device.

Windows 8.1 and earlier versions

In Windows 8.1 and earlier versions of the operating system, Usbser.sys is not automatically loaded when a USB-to-serial device is attached to a computer. To load the driver, you need to write an INF that references the modem INF (mdmcpq.inf) by using the Include directive. The directive is required for instantiating the service, copying inbox binaries, and registering a device interface GUID that applications require to find the device and talk to it. That INF specifies 'Usbser' as a lower filter driver in a device stack.

The INF also needs to specify the device setup class as Modem to use mdmcpq.inf. Under the [Version] section of the INF, specify the Modem and the device class GUID. for details, see System-Supplied Device Setup Classes.

For more information, see this KB article.

Driver

Configure selective suspend for Usbser.sys

Starting in Windows 10, Usbser.sys supports USB Selective Suspend. It allows the attached USB-to-serial device to enter a low power state when not in use, while the system remains in the S0 state. When communication with the device resumes, the device can leave the Suspend state and resume Working state. The feature is disabled by default and can be enabled and configured by setting the IdleUsbSelectiveSuspendPolicy entry under this registry key:

To configure power management features of Usbser.sys, you can set IdleUsbSelectiveSuspendPolicy to:

  • '0x00000001': Enters selective suspend when idle, that is, when there are no active data transfers to or from the device.

  • '0x00000000': Enters selective suspend only when there are no open handles to the device.

That entry can be added in one of two ways:

  • Write an INF that references the install INF and add the registry entry in the HW.AddReg section.

  • Describe the registry entry in an extended properties OS feature descriptor. Add a custom property section that sets the bPropertyName field to a Unicode string, 'IdleUsbSelectiveSuspendPolicy' and wPropertyNameLength to 62 bytes. Set the bPropertyData field to '0x00000001' or '0x00000000'. The property values are stored as little-endian 32-bit integers.

    For more information, see Microsoft OS Descriptors.

Develop Windows applications for a USB CDC device

Microchip Motherboards Driver Download For Windows 10 Iso

If you install Usbser.sys for the USB CDC device, here are the application programming model options:

Microchip Motherboards Driver Download For Windows 10 Free

  • Starting in Windows 10, a Windows app can send requests to Usbser.sys by using the Windows.Devices.SerialCommunication namespace. It defines Windows Runtime classes that can use to communicate with a USB CDC device through a serial port or some abstraction of a serial port. The classes provide functionality to discover such serial device, read and write data, and control serial-specific properties for flow control, such as setting baud rate, signal states.

  • In Windows 8.1 and earlier versions, you can write a Windows desktop application that opens a virtual COM port and communicates with the device. For more information, see:

    Win32 programming model:

    • .NET framework programming model:

Related topics